What's New in Mods from Smok? The Smok Morph 2 Kit has arrived.
The Smok Morph 2 kit Electric Vapor Cigarette is 230W with a 7mm tank it's an updated version of the Morph 219 with some awesome improvements. Let's start with the look & feel of the kit. The soft two-tone leather covers a large part of the surface, and undoubtedly gives a comfortable touch, the excellent degree of finish and the right leather / metal mix give this kit an elegant sporty look. It's much lighter in weight-the Morph 2 has quite comfortable dimensions, it carries well and does not weigh too much
The front shows the 0.96 "color screen, the USB-C charging socket, the" + "and" - " adjustment buttons, all housed within a metal holder, surrounded by two-tone leather upholstery. On the back, the frame design houses the large vertical writing “Morph 2” in the center, the two-tone coating creates the edge and extends to the sides of the Mod.
Smok Morph 2 uses dual 18650 batteries for operation.
The fire button is located on the side, its shape is rectangular of excellent size and is easy to click, on this side you can see the writing "smok Newchip inside" in the center between the two parallel red seams-very nice feature!
The Morph 2 Mod can accommodate tanks of very large diameter, however even atomizers with a diameter of 23 / 24mm do not clash at all.
NOW LET'S TALK ABOUT THIS TFV18 TANK!
The New Tank- TFV16 and TFV18 look like twins with a few changes.
The brand new TFV18 Sub-ohm Tank features a colossal 7.5ml e-liquid capacity, allows you to vape all day virtually without refilling.
At the top there is a small button to free the filling port, just press the button and push sideways to start charging.
The two AFCs have been modified to improve the cross section of the airflow favoring better regulation from RDL to fully open DL. Another upgrade, the TFV18 now takes advantage of the excellent conductivity of copper through 5 pins placed on the base to more efficiently transfer the power to the coil for a circular and fast heating.
These are the new Mesh coils present in the Kit:
• Mesh Coil 0.33Ω range 80-140W (Best 100-110W)
This Single-Mesh coil is very aromatic already starting at 70W (10W below the minimum range). At 70W the heating is immediate thanks to the instant reaction chipset (0.001s) and perhaps also thanks to the new circular current transmission system of the TFV18.
Vaping at 70W is great and you don't detect any complications at this power. At 80- 90W the performances are spectacular, the steam is good, very abundant and hot enough for most vapers.
• Dual meshed Coil from O.15Ω range 80-140W (Best 100-110W)
The behavior of this Dual-mesh is similar to the previous one, good from 80W and up to maximum power (140W) however Smoke likes 90 or 100W for finding the best configuration.
Both of these new gigantic coils need a lot of liquid, so you'll need to really wet the cotton before activating them.
Compared to the previous TFV16 coils you will notice an improvement in the speed with which they reach the best aromatic yield, no cotton flavor even when new.
The kit includes:
• 1 MORPH 2 Mod
• 1 Tank TFV18 (7.5 ml)
• 1 0.33Ω TFV18 Mesh Coil (pre-installed)
• 1 TFV18 Dual Meshed Coil of O.15Ω
• 1 spare Bubble Glass
• 1 Type C cable
• 1 User Manual
Morph 2 Mod Specifications:
• Dimensions: 47,5x31.7x88mm
• Weight: 133.5 g
• Output Mode: WW - TC / NI-TI-SS
• Power Range: 1W-230W (VW) / 10W-80W (TC)
• Standby current: <300uA
• Input voltage: 6.4V-8.4V.
• Output voltage: 1.2V-8.2V.
• Reaction time: 0.001s
• Charging voltage: 5V ± 0.2V.
• Charging current: 2A
• Resistance range: 0.1Ω-2.5Ω (WW) / 0.05Ω-2Ω (TC)
• Temperature range: 200 ° F-600 ° F / 100 ° C-315 ° C.
Smok TFV18 Specifications:
• Dimensions: 66.3xØ31.6mm
• Weight: 93.3g
• Material: stainless steel
• Capacity: 7.5ml (Mesh Coil 0.33Ω)
• Capacity: 6.5ml (Dual meshed Coil of O.15Ω)
• Recommended Power: 80-140W (best 100-110W)
• Thread: 510
Find replacement TFV18 coils for your tank here!